ACRI-BOND CLEANER
Fast Drying Industrial solvent cleaner
Contains
PETROLEUM DISTILLATES, N.O.S.
UN number 1268
Class 3
Packing group II
Hazchem Code 3[Y]E
Instructions
Apply to a clean cleaning cloth and wipe gently. Change cloth sides to avoid scratching the surface If scratched use XERAPOL® scratch removal. Use ACRI-BOND MASKREM cleaner for masking tape and paper residue removal and BRILLIANIZE® antistatic polisher for finishing touch.
Recommended use
This cleaner has been designed for cleaning of Acrylic. It shows good results with other plastic materials such as Polycarb, ABS and HIPS. Test before use.
Warranty
This product is intended for use by skilled individuals at their own risk. Since specific use, materials and handling is not controlled by ATA, our warranty is limited to the replacement of defective products only.
Risk - R11, 38, 48/20, 62, 65, 67, 51/53
Chemical used in this cleaner is highly flammable and irritating to skin. There is a danger of serious damage to health by prolonged exposure through inhalation. Vapours may cause drowsiness and dizziness.
Safety - S9, 16, 23, 61, 62, 2
Keep container in a well-ventilated place. Keep away from sources of ignition - No smoking. Do not breathe vapour. Adequate explosion-proof ventilation to control airborne concentrations. Avoid release to the environment. Refer to instructions/Safety data sheets. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.
First Aid
Remove to fresh air. If rapid recovery does not occur, transport to nearest medical facility for additional treatment. Remove contaminated clothing. Flush exposed area with water If swallowed, do not induce vomiting.
Spills/leaks
Recover or recycle if possible. Drain container thoroughly. After draining, vent in a safe place away from sparks and fire. Allow residues to evaporate or soak up with an appropriate absorbent material and dispose of safely. Remove contaminated soil and dispose of safely.
Fire
Carbon monoxide may be evolved if incomplete combustion occurs. Use foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only. Do not use water in a jet.
ADDITIONAL INFORMATION IS LISTED IN THE MATERIAL SAFETY DATA SHEET
MSDS Download: ACRI-BOND CLEANER
ACRI-BOND MASKREM
Contains
Kerosine (petroleum), hydrodesulfurized NCAD
Instructions
Apply liberally over masking tape or residue to be removed. Leave until soaked and than scrap or remove paper or tape. To remove remaining residue apply to a clean cleaning cloth and wipe gently. Change cloth sides to avoid scratching the surface. If scratched use XERAPOL® scratch removal. Use ACRI-BOND CLEANER and BRILLIANIZE® antistatic polisher for finishing touches.
Recommended use
This cleaner has been designed for cleaning of Acrylic. It shows good results with other plastic materials such as Polycarb, ABS and HIPS. Test before use.
Warranty
This product is intended for use by skilled individuals at their own risk. Since specific use, materials and handling is not controlled by ATA, our warranty is limited to the replacement of defective products only.
Risk - R40, 65, 66
The chemical used for this product is classified as hazardous according to the criteria of NOHSC, and not classified as Dangerous Goods according to the Australian Dangerous Goods Code. Limited evidence of carcinogenic effect. Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking.
Safety - S23, 24 62, 36/37
Keep container in a well-ventilated place. Do not breathe vapour. Adequate ventilation to control airborne concentrations. Avoid release to the environment. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.
First Aid
Remove to fresh air. If rapid recovery does not occur, transport to nearest medical facility for additional treatment. Remove contaminated clothing. Flush exposed area with water. If swallowed, do not induce vomiting
Spills/leaks
Recover or recycle if possible. Drain container thoroughly. After draining, vent in a safe place away from sparks and fire. Allow residues to evaporate or soak up with an appropriate absorbent material and dispose of safely. Remove contaminated soil and dispose of safely.
Fire
Carbon monoxide may be evolved if incomplete combustion occurs. Use foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only. Do not use water in a jet.
ADDITIONAL INFORMATION IS LISTED IN THE MATERIAL SAFETY DATA SHEET